We are your One-Stop Solution for Garage Door and Garage Door Installation, Opener, Repairs, and Services.

Here are some helpful safety tips. This list is not intended to be a comprehensive list of every safety precaution. Always consult your manufacturer’s installation or instruction manual for safety information about your model.

✓ Need Strut

 

✓ Opener not working

✓ Remote not working

✓ Keypad not working

✓ Opener won't open or close

✓ Safety eyes problem

✓ Broken sprocket Stripped gear

It is through the cables that we see the spring's high-pressure work transferring to lift the door. Cables bear the weight of the door when the door is closing. The cable can break or come off its spool.

The door opens or closes unevenly or shows visible signs of cables fraying or becoming loose or disconnected.

Call us right now, and one of our experienced technicians will fix the problem. Get to the root of the cause to prevent the problem from happening again.

 

The most common issue you will face with your garage is a broken spring, and this can cause the door to stop working.

The torsion spring is actually the main component in the garage door opener and the hardest working part of the whole Garage door system.

The opener does only a fraction of the actual lifting that is necessary to move your garage door.

Therefore, if the torsion spring stretches and breaks, the garage door opener will not be able to function and open the door.

Do not try to operate the door, as this is a safety hazard. Damaged springs can cause the garage door to crash down or injure someone. Get in touch with us, who will fix the issue within the same day or within 24 hours.

The garage door rollers are responsible for the smooth operation of the doors.

These rollers are held in position with the help of brackets that are fixed to your garage and to the track.

Those garage doors over a decade old have faced several environmental factors and buildup from dust, lubricants, and oil. All these factors can start to take their toll and wear out those rollers.

The quality of the rollers gets hampered, and they can slip off the track from time to time.

Another common issue with a garage door is that it stops and then reverses if you want to close it.

It also makes a clicking noise, accompanied by the opener light flashing.

This clearly means that the safety sensors are out of alignment and the garage door will not close.

As one side of the track acts as the receiving eye sensor and the other side sends the signal, if any one of these sensors are knocked out of alignment, the receiving end will not get the signal.

This triggers the door to turn around.

The door goes back up when you hit the wall button to close the door.  You have to press the button down until the door shuts.

It is essential to keep the red lights on and the sensors on. Make manual adjustments if you see a flicker until the lights are lit. If you still face the problem, it is essential to call us, the experts, as there could be a bigger issue with the opener, for example, a circuit board problem.